{"title":"Complete power systems","description":"\u003cp\u003eBattery, charging, inverter and distribution matched as one system, so the sizing is done for you.\u003c\/p\u003e","products":[{"product_id":"transit-custom-complete-electrical-system","title":"Transit Custom Complete Electrical System","description":"\u003cp\u003eTransit Custom Complete Electrical System: a 200Ah lithium bank, 50 amp DC to DC charger, MPPT controller, 2000VA inverter charger, hook up inlet, consumer unit, fuse board, battery monitor and cable.\u003c\/p\u003e\u003cp\u003eA complete electrical system sized for the way you use the van, with the batteries, charging and distribution designed together rather than bought one piece at a time. We size it from how many days you want to stay off grid and what you run, and we send the diagram with it. The Transit Custom is the one tonne van that has replaced the Transporter on many UK driveways, with a flat load floor and a sensible roof rib layout for vents.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Transit Custom\u003c\/li\u003e\n\u003cli\u003eVan body: L1 and L2 low roof and high roof\u003c\/li\u003e\n\u003cli\u003eYears: 2012 on\u003c\/li\u003e\n\u003cli\u003eSpecification: 200Ah lithium, 2000VA inverter charger, 50 amp DC to DC, 50 amp MPPT, mains hook up\u003c\/li\u003e\n\u003cli\u003eQuality: components from established makers with UK support\u003c\/li\u003e\n\u003cli\u003ePower draw: up to 160 amps through the inverter at full load\u003c\/li\u003e\n\u003cli\u003eWiring: sized cable throughout with a main fuse and isolator at the battery\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 3 days\u003c\/li\u003e\n\u003cli\u003eRegulations: mains hook up wiring must include an RCD and be installed by a competent person, with an electrical installation certificate recommended\u003c\/li\u003e\n\u003cli\u003eWeight: about 58 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: three years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLithium battery\u003c\/li\u003e\n\u003cli\u003eDC to DC charger\u003c\/li\u003e\n\u003cli\u003eMPPT controller\u003c\/li\u003e\n\u003cli\u003eInverter charger\u003c\/li\u003e\n\u003cli\u003eHook up inlet and consumer unit\u003c\/li\u003e\n\u003cli\u003eFuse board\u003c\/li\u003e\n\u003cli\u003eBattery monitor\u003c\/li\u003e\n\u003cli\u003eCable kit and diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eEvery positive cable is fused as close to the battery as possible, cable is sized for voltage drop rather than just current, and anything carrying mains voltage from an inverter or hook up goes through an RCD. If you are not confident with any of that, buy the fitted option; a badly wired 12V system can start a fire as easily as a mains one. Conversions are heavy. Batteries, water, furniture and insulation can add 500 to 800 kg, and a van that starts at 3.5 tonnes gross can end up overweight before anyone has packed a bag. Every listing states its weight, and it is worth weighing the empty van at a public weighbridge before the build begins. Tell your insurer about the conversion as it progresses, not afterwards. Since 2019 the DVLA has been strict about reclassifying vans as motor caravans on the V5C, and most specialist insurers will cover a converted van as a camper whatever the V5C says, provided they know what is in it. We supply and fit camper conversion parts for panel vans, and we build and live in our own. We are not Ford, Mercedes-Benz or Volkswagen and are not appointed by them; the van names describe fitment. Everything here is chosen for vans that get used all year, including the British winter, and we say plainly where a cheaper part would do the job.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered with our wiring diagram or fitting notes, for a self build or your own installer. Parts and Fitting is fitted at our workshop by our own installers, tested, and signed off with a written installation record.\u003c\/p\u003e","brand":"Vanlife Outfitters","offers":[{"title":"Parts Only","offer_id":58074446561662,"sku":"VLO-PWS-001-PO","price":2449.0,"currency_code":"GBP","in_stock":true},{"title":"Parts and Fitting","offer_id":58074446594430,"sku":"VLO-PWS-001-PAF","price":3124.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/8759\/0270\/files\/Transit_Custom_Complete_Electrical_System_325b809b-c393-4751-a5cd-bbb7b8db736b.jpg?v=1790179286"},{"product_id":"transit-complete-electrical-system","title":"Transit Complete Electrical System","description":"\u003cp\u003eTransit Complete Electrical System: a 200Ah lithium bank, 50 amp DC to DC charger, MPPT controller, 2000VA inverter charger, hook up inlet, consumer unit, fuse board, battery monitor and cable.\u003c\/p\u003e\u003cp\u003eA complete electrical system sized for the way you use the van, with the batteries, charging and distribution designed together rather than bought one piece at a time. We size it from how many days you want to stay off grid and what you run, and we send the diagram with it. The full size Transit gives the most usable width of the four at the price, and the high roof L3 is the most popular full size build we supply.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Transit\u003c\/li\u003e\n\u003cli\u003eVan body: L2 L3 and L4 medium and high roof\u003c\/li\u003e\n\u003cli\u003eYears: 2014 on\u003c\/li\u003e\n\u003cli\u003eSpecification: 200Ah lithium, 2000VA inverter charger, 50 amp DC to DC, 50 amp MPPT, mains hook up\u003c\/li\u003e\n\u003cli\u003eQuality: components from established makers with UK support\u003c\/li\u003e\n\u003cli\u003ePower draw: up to 160 amps through the inverter at full load\u003c\/li\u003e\n\u003cli\u003eWiring: sized cable throughout with a main fuse and isolator at the battery\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 3 days\u003c\/li\u003e\n\u003cli\u003eRegulations: mains hook up wiring must include an RCD and be installed by a competent person, with an electrical installation certificate recommended\u003c\/li\u003e\n\u003cli\u003eWeight: about 58 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: three years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLithium battery\u003c\/li\u003e\n\u003cli\u003eDC to DC charger\u003c\/li\u003e\n\u003cli\u003eMPPT controller\u003c\/li\u003e\n\u003cli\u003eInverter charger\u003c\/li\u003e\n\u003cli\u003eHook up inlet and consumer unit\u003c\/li\u003e\n\u003cli\u003eFuse board\u003c\/li\u003e\n\u003cli\u003eBattery monitor\u003c\/li\u003e\n\u003cli\u003eCable kit and diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eEvery positive cable is fused as close to the battery as possible, cable is sized for voltage drop rather than just current, and anything carrying mains voltage from an inverter or hook up goes through an RCD. If you are not confident with any of that, buy the fitted option; a badly wired 12V system can start a fire as easily as a mains one. Conversions are heavy. Batteries, water, furniture and insulation can add 500 to 800 kg, and a van that starts at 3.5 tonnes gross can end up overweight before anyone has packed a bag. Every listing states its weight, and it is worth weighing the empty van at a public weighbridge before the build begins. Tell your insurer about the conversion as it progresses, not afterwards. Since 2019 the DVLA has been strict about reclassifying vans as motor caravans on the V5C, and most specialist insurers will cover a converted van as a camper whatever the V5C says, provided they know what is in it. We supply and fit camper conversion parts for panel vans, and we build and live in our own. We are not Ford, Mercedes-Benz or Volkswagen and are not appointed by them; the van names describe fitment. Everything here is chosen for vans that get used all year, including the British winter, and we say plainly where a cheaper part would do the job.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered with our wiring diagram or fitting notes, for a self build or your own installer. Parts and Fitting is fitted at our workshop by our own installers, tested, and signed off with a written installation record.\u003c\/p\u003e","brand":"Vanlife Outfitters","offers":[{"title":"Parts Only","offer_id":58074446659966,"sku":"VLO-PWS-002-PO","price":2749.0,"currency_code":"GBP","in_stock":true},{"title":"Parts and Fitting","offer_id":58074446692734,"sku":"VLO-PWS-002-PAF","price":3524.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/8759\/0270\/files\/Transit_Complete_Electrical_System_331e4614-ea53-40e6-bcff-7feeeb193cfd.jpg?v=1790179286"},{"product_id":"sprinter-w907-complete-electrical-system","title":"Sprinter W907 Complete Electrical System","description":"\u003cp\u003eSprinter W907 Complete Electrical System: a 200Ah lithium bank, 50 amp DC to DC charger, MPPT controller, 2000VA inverter charger, hook up inlet, consumer unit, fuse board, battery monitor and cable.\u003c\/p\u003e\u003cp\u003eA complete electrical system sized for the way you use the van, with the batteries, charging and distribution designed together rather than bought one piece at a time. We size it from how many days you want to stay off grid and what you run, and we send the diagram with it. The W907 Sprinter has the best standing height and the best dealer network in Europe, and the most complicated electrics of the four, which matters when you tap into them.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Sprinter W907\u003c\/li\u003e\n\u003cli\u003eVan body: L2 L3 and L4 high roof\u003c\/li\u003e\n\u003cli\u003eYears: 2018 on\u003c\/li\u003e\n\u003cli\u003eSpecification: 200Ah lithium, 2000VA inverter charger, 50 amp DC to DC, 50 amp MPPT, mains hook up\u003c\/li\u003e\n\u003cli\u003eQuality: components from established makers with UK support\u003c\/li\u003e\n\u003cli\u003ePower draw: up to 160 amps through the inverter at full load\u003c\/li\u003e\n\u003cli\u003eWiring: sized cable throughout with a main fuse and isolator at the battery\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 3 days\u003c\/li\u003e\n\u003cli\u003eRegulations: mains hook up wiring must include an RCD and be installed by a competent person, with an electrical installation certificate recommended\u003c\/li\u003e\n\u003cli\u003eWeight: about 58 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: three years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLithium battery\u003c\/li\u003e\n\u003cli\u003eDC to DC charger\u003c\/li\u003e\n\u003cli\u003eMPPT controller\u003c\/li\u003e\n\u003cli\u003eInverter charger\u003c\/li\u003e\n\u003cli\u003eHook up inlet and consumer unit\u003c\/li\u003e\n\u003cli\u003eFuse board\u003c\/li\u003e\n\u003cli\u003eBattery monitor\u003c\/li\u003e\n\u003cli\u003eCable kit and diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eEvery positive cable is fused as close to the battery as possible, cable is sized for voltage drop rather than just current, and anything carrying mains voltage from an inverter or hook up goes through an RCD. If you are not confident with any of that, buy the fitted option; a badly wired 12V system can start a fire as easily as a mains one. Conversions are heavy. Batteries, water, furniture and insulation can add 500 to 800 kg, and a van that starts at 3.5 tonnes gross can end up overweight before anyone has packed a bag. Every listing states its weight, and it is worth weighing the empty van at a public weighbridge before the build begins. Tell your insurer about the conversion as it progresses, not afterwards. Since 2019 the DVLA has been strict about reclassifying vans as motor caravans on the V5C, and most specialist insurers will cover a converted van as a camper whatever the V5C says, provided they know what is in it. We supply and fit camper conversion parts for panel vans, and we build and live in our own. We are not Ford, Mercedes-Benz or Volkswagen and are not appointed by them; the van names describe fitment. Everything here is chosen for vans that get used all year, including the British winter, and we say plainly where a cheaper part would do the job.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered with our wiring diagram or fitting notes, for a self build or your own installer. Parts and Fitting is fitted at our workshop by our own installers, tested, and signed off with a written installation record.\u003c\/p\u003e","brand":"Vanlife Outfitters","offers":[{"title":"Parts Only","offer_id":58074446725502,"sku":"VLO-PWS-003-PO","price":2899.0,"currency_code":"GBP","in_stock":true},{"title":"Parts and Fitting","offer_id":58074446758270,"sku":"VLO-PWS-003-PAF","price":3724.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/8759\/0270\/files\/Sprinter_W907_Complete_Electrical_System_e059e417-8da4-4e7d-9073-f16e5582acb7.jpg?v=1790179286"},{"product_id":"sprinter-w906-complete-electrical-system","title":"Sprinter W906 Complete Electrical System","description":"\u003cp\u003eSprinter W906 Complete Electrical System: a 200Ah lithium bank, 50 amp DC to DC charger, MPPT controller, 2000VA inverter charger, hook up inlet, consumer unit, fuse board, battery monitor and cable.\u003c\/p\u003e\u003cp\u003eA complete electrical system sized for the way you use the van, with the batteries, charging and distribution designed together rather than bought one piece at a time. We size it from how many days you want to stay off grid and what you run, and we send the diagram with it. The W906 Sprinter is the most common secondhand base for a build. Check the sills, the rear arches and the door bottoms before you spend money on the inside.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Sprinter W906\u003c\/li\u003e\n\u003cli\u003eVan body: MWB and LWB high roof\u003c\/li\u003e\n\u003cli\u003eYears: 2006 to 2018\u003c\/li\u003e\n\u003cli\u003eSpecification: 200Ah lithium, 2000VA inverter charger, 50 amp DC to DC, 50 amp MPPT, mains hook up\u003c\/li\u003e\n\u003cli\u003eQuality: components from established makers with UK support\u003c\/li\u003e\n\u003cli\u003ePower draw: up to 160 amps through the inverter at full load\u003c\/li\u003e\n\u003cli\u003eWiring: sized cable throughout with a main fuse and isolator at the battery\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 3 days\u003c\/li\u003e\n\u003cli\u003eRegulations: mains hook up wiring must include an RCD and be installed by a competent person, with an electrical installation certificate recommended\u003c\/li\u003e\n\u003cli\u003eWeight: about 58 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: three years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLithium battery\u003c\/li\u003e\n\u003cli\u003eDC to DC charger\u003c\/li\u003e\n\u003cli\u003eMPPT controller\u003c\/li\u003e\n\u003cli\u003eInverter charger\u003c\/li\u003e\n\u003cli\u003eHook up inlet and consumer unit\u003c\/li\u003e\n\u003cli\u003eFuse board\u003c\/li\u003e\n\u003cli\u003eBattery monitor\u003c\/li\u003e\n\u003cli\u003eCable kit and diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eEvery positive cable is fused as close to the battery as possible, cable is sized for voltage drop rather than just current, and anything carrying mains voltage from an inverter or hook up goes through an RCD. If you are not confident with any of that, buy the fitted option; a badly wired 12V system can start a fire as easily as a mains one. Conversions are heavy. Batteries, water, furniture and insulation can add 500 to 800 kg, and a van that starts at 3.5 tonnes gross can end up overweight before anyone has packed a bag. Every listing states its weight, and it is worth weighing the empty van at a public weighbridge before the build begins. Tell your insurer about the conversion as it progresses, not afterwards. Since 2019 the DVLA has been strict about reclassifying vans as motor caravans on the V5C, and most specialist insurers will cover a converted van as a camper whatever the V5C says, provided they know what is in it. We supply and fit camper conversion parts for panel vans, and we build and live in our own. We are not Ford, Mercedes-Benz or Volkswagen and are not appointed by them; the van names describe fitment. Everything here is chosen for vans that get used all year, including the British winter, and we say plainly where a cheaper part would do the job.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered with our wiring diagram or fitting notes, for a self build or your own installer. Parts and Fitting is fitted at our workshop by our own installers, tested, and signed off with a written installation record.\u003c\/p\u003e","brand":"Vanlife Outfitters","offers":[{"title":"Parts Only","offer_id":58074446791038,"sku":"VLO-PWS-004-PO","price":2749.0,"currency_code":"GBP","in_stock":true},{"title":"Parts and Fitting","offer_id":58074446823806,"sku":"VLO-PWS-004-PAF","price":3524.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/8759\/0270\/files\/Sprinter_W906_Complete_Electrical_System_11e1cec0-5da2-4f0f-b914-8df036c1b96b.jpg?v=1790179287"},{"product_id":"crafter-mk2-complete-electrical-system","title":"Crafter Mk2 Complete Electrical System","description":"\u003cp\u003eCrafter Mk2 Complete Electrical System: a 200Ah lithium bank, 50 amp DC to DC charger, MPPT controller, 2000VA inverter charger, hook up inlet, consumer unit, fuse board, battery monitor and cable.\u003c\/p\u003e\u003cp\u003eA complete electrical system sized for the way you use the van, with the batteries, charging and distribution designed together rather than bought one piece at a time. We size it from how many days you want to stay off grid and what you run, and we send the diagram with it. The Mk2 Crafter is the widest of the four inside and its flat walls make lining and furniture simpler than on any other van here.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Crafter Mk2\u003c\/li\u003e\n\u003cli\u003eVan body: MWB and LWB high roof\u003c\/li\u003e\n\u003cli\u003eYears: 2017 on\u003c\/li\u003e\n\u003cli\u003eSpecification: 200Ah lithium, 2000VA inverter charger, 50 amp DC to DC, 50 amp MPPT, mains hook up\u003c\/li\u003e\n\u003cli\u003eQuality: components from established makers with UK support\u003c\/li\u003e\n\u003cli\u003ePower draw: up to 160 amps through the inverter at full load\u003c\/li\u003e\n\u003cli\u003eWiring: sized cable throughout with a main fuse and isolator at the battery\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 3 days\u003c\/li\u003e\n\u003cli\u003eRegulations: mains hook up wiring must include an RCD and be installed by a competent person, with an electrical installation certificate recommended\u003c\/li\u003e\n\u003cli\u003eWeight: about 58 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: three years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLithium battery\u003c\/li\u003e\n\u003cli\u003eDC to DC charger\u003c\/li\u003e\n\u003cli\u003eMPPT controller\u003c\/li\u003e\n\u003cli\u003eInverter charger\u003c\/li\u003e\n\u003cli\u003eHook up inlet and consumer unit\u003c\/li\u003e\n\u003cli\u003eFuse board\u003c\/li\u003e\n\u003cli\u003eBattery monitor\u003c\/li\u003e\n\u003cli\u003eCable kit and diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eEvery positive cable is fused as close to the battery as possible, cable is sized for voltage drop rather than just current, and anything carrying mains voltage from an inverter or hook up goes through an RCD. If you are not confident with any of that, buy the fitted option; a badly wired 12V system can start a fire as easily as a mains one. Conversions are heavy. Batteries, water, furniture and insulation can add 500 to 800 kg, and a van that starts at 3.5 tonnes gross can end up overweight before anyone has packed a bag. Every listing states its weight, and it is worth weighing the empty van at a public weighbridge before the build begins. Tell your insurer about the conversion as it progresses, not afterwards. Since 2019 the DVLA has been strict about reclassifying vans as motor caravans on the V5C, and most specialist insurers will cover a converted van as a camper whatever the V5C says, provided they know what is in it. We supply and fit camper conversion parts for panel vans, and we build and live in our own. We are not Ford, Mercedes-Benz or Volkswagen and are not appointed by them; the van names describe fitment. Everything here is chosen for vans that get used all year, including the British winter, and we say plainly where a cheaper part would do the job.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered with our wiring diagram or fitting notes, for a self build or your own installer. Parts and Fitting is fitted at our workshop by our own installers, tested, and signed off with a written installation record.\u003c\/p\u003e","brand":"Vanlife Outfitters","offers":[{"title":"Parts Only","offer_id":58074446922110,"sku":"VLO-PWS-005-PO","price":2849.0,"currency_code":"GBP","in_stock":true},{"title":"Parts and Fitting","offer_id":58074446954878,"sku":"VLO-PWS-005-PAF","price":3649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/8759\/0270\/files\/Crafter_Mk2_Complete_Electrical_System_1968b324-11a2-4ae5-a5fb-11a97560af5b.jpg?v=1790179287"},{"product_id":"crafter-mk1-complete-electrical-system","title":"Crafter Mk1 Complete Electrical System","description":"\u003cp\u003eCrafter Mk1 Complete Electrical System: a 200Ah lithium bank, 50 amp DC to DC charger, MPPT controller, 2000VA inverter charger, hook up inlet, consumer unit, fuse board, battery monitor and cable.\u003c\/p\u003e\u003cp\u003eA complete electrical system sized for the way you use the van, with the batteries, charging and distribution designed together rather than bought one piece at a time. We size it from how many days you want to stay off grid and what you run, and we send the diagram with it. The Mk1 Crafter shares its body with the W906 Sprinter, so most Sprinter W906 parts fit, and we list both where they do.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Crafter Mk1\u003c\/li\u003e\n\u003cli\u003eVan body: MWB and LWB high roof\u003c\/li\u003e\n\u003cli\u003eYears: 2006 to 2016\u003c\/li\u003e\n\u003cli\u003eSpecification: 200Ah lithium, 2000VA inverter charger, 50 amp DC to DC, 50 amp MPPT, mains hook up\u003c\/li\u003e\n\u003cli\u003eQuality: components from established makers with UK support\u003c\/li\u003e\n\u003cli\u003ePower draw: up to 160 amps through the inverter at full load\u003c\/li\u003e\n\u003cli\u003eWiring: sized cable throughout with a main fuse and isolator at the battery\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 3 days\u003c\/li\u003e\n\u003cli\u003eRegulations: mains hook up wiring must include an RCD and be installed by a competent person, with an electrical installation certificate recommended\u003c\/li\u003e\n\u003cli\u003eWeight: about 58 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: three years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLithium battery\u003c\/li\u003e\n\u003cli\u003eDC to DC charger\u003c\/li\u003e\n\u003cli\u003eMPPT controller\u003c\/li\u003e\n\u003cli\u003eInverter charger\u003c\/li\u003e\n\u003cli\u003eHook up inlet and consumer unit\u003c\/li\u003e\n\u003cli\u003eFuse board\u003c\/li\u003e\n\u003cli\u003eBattery monitor\u003c\/li\u003e\n\u003cli\u003eCable kit and diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eEvery positive cable is fused as close to the battery as possible, cable is sized for voltage drop rather than just current, and anything carrying mains voltage from an inverter or hook up goes through an RCD. If you are not confident with any of that, buy the fitted option; a badly wired 12V system can start a fire as easily as a mains one. Conversions are heavy. Batteries, water, furniture and insulation can add 500 to 800 kg, and a van that starts at 3.5 tonnes gross can end up overweight before anyone has packed a bag. Every listing states its weight, and it is worth weighing the empty van at a public weighbridge before the build begins. Tell your insurer about the conversion as it progresses, not afterwards. Since 2019 the DVLA has been strict about reclassifying vans as motor caravans on the V5C, and most specialist insurers will cover a converted van as a camper whatever the V5C says, provided they know what is in it. We supply and fit camper conversion parts for panel vans, and we build and live in our own. We are not Ford, Mercedes-Benz or Volkswagen and are not appointed by them; the van names describe fitment. Everything here is chosen for vans that get used all year, including the British winter, and we say plainly where a cheaper part would do the job.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered with our wiring diagram or fitting notes, for a self build or your own installer. Parts and Fitting is fitted at our workshop by our own installers, tested, and signed off with a written installation record.\u003c\/p\u003e","brand":"Vanlife Outfitters","offers":[{"title":"Parts Only","offer_id":58074447020414,"sku":"VLO-PWS-006-PO","price":2649.0,"currency_code":"GBP","in_stock":true},{"title":"Parts and Fitting","offer_id":58074447053182,"sku":"VLO-PWS-006-PAF","price":3399.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/8759\/0270\/files\/Crafter_Mk1_Complete_Electrical_System_842fc15d-8f86-4a23-aeb6-207ae57d919e.jpg?v=1790179287"},{"product_id":"transporter-t6-and-t6-1-complete-electrical-system","title":"Transporter T6 and T6.1 Complete Electrical System","description":"\u003cp\u003eTransporter T6 and T6.1 Complete Electrical System: a 200Ah lithium bank, 50 amp DC to DC charger, MPPT controller, 2000VA inverter charger, hook up inlet, consumer unit, fuse board, battery monitor and cable.\u003c\/p\u003e\u003cp\u003eA complete electrical system sized for the way you use the van, with the batteries, charging and distribution designed together rather than bought one piece at a time. We size it from how many days you want to stay off grid and what you run, and we send the diagram with it. The T6 and T6.1 Transporter is the classic small camper base. Space is tight, so every part here is chosen for size as well as capacity.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Transporter T6 and T6.1\u003c\/li\u003e\n\u003cli\u003eVan body: SWB and LWB low roof\u003c\/li\u003e\n\u003cli\u003eYears: 2015 on\u003c\/li\u003e\n\u003cli\u003eSpecification: 200Ah lithium, 2000VA inverter charger, 50 amp DC to DC, 50 amp MPPT, mains hook up\u003c\/li\u003e\n\u003cli\u003eQuality: components from established makers with UK support\u003c\/li\u003e\n\u003cli\u003ePower draw: up to 160 amps through the inverter at full load\u003c\/li\u003e\n\u003cli\u003eWiring: sized cable throughout with a main fuse and isolator at the battery\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 3 days\u003c\/li\u003e\n\u003cli\u003eRegulations: mains hook up wiring must include an RCD and be installed by a competent person, with an electrical installation certificate recommended\u003c\/li\u003e\n\u003cli\u003eWeight: about 58 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: three years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLithium battery\u003c\/li\u003e\n\u003cli\u003eDC to DC charger\u003c\/li\u003e\n\u003cli\u003eMPPT controller\u003c\/li\u003e\n\u003cli\u003eInverter charger\u003c\/li\u003e\n\u003cli\u003eHook up inlet and consumer unit\u003c\/li\u003e\n\u003cli\u003eFuse board\u003c\/li\u003e\n\u003cli\u003eBattery monitor\u003c\/li\u003e\n\u003cli\u003eCable kit and diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eEvery positive cable is fused as close to the battery as possible, cable is sized for voltage drop rather than just current, and anything carrying mains voltage from an inverter or hook up goes through an RCD. If you are not confident with any of that, buy the fitted option; a badly wired 12V system can start a fire as easily as a mains one. Conversions are heavy. Batteries, water, furniture and insulation can add 500 to 800 kg, and a van that starts at 3.5 tonnes gross can end up overweight before anyone has packed a bag. Every listing states its weight, and it is worth weighing the empty van at a public weighbridge before the build begins. Tell your insurer about the conversion as it progresses, not afterwards. Since 2019 the DVLA has been strict about reclassifying vans as motor caravans on the V5C, and most specialist insurers will cover a converted van as a camper whatever the V5C says, provided they know what is in it. We supply and fit camper conversion parts for panel vans, and we build and live in our own. We are not Ford, Mercedes-Benz or Volkswagen and are not appointed by them; the van names describe fitment. Everything here is chosen for vans that get used all year, including the British winter, and we say plainly where a cheaper part would do the job.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered with our wiring diagram or fitting notes, for a self build or your own installer. Parts and Fitting is fitted at our workshop by our own installers, tested, and signed off with a written installation record.\u003c\/p\u003e","brand":"Vanlife Outfitters","offers":[{"title":"Parts Only","offer_id":58074447085950,"sku":"VLO-PWS-007-PO","price":2549.0,"currency_code":"GBP","in_stock":true},{"title":"Parts and Fitting","offer_id":58074447118718,"sku":"VLO-PWS-007-PAF","price":3249.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/8759\/0270\/files\/Transporter_T6_and_T6.1_Complete_Electrical_System_c1cd8f67-d4f9-4a9c-92d2-19993aea4af6.jpg?v=1790179287"},{"product_id":"transporter-t5-complete-electrical-system","title":"Transporter T5 Complete Electrical System","description":"\u003cp\u003eTransporter T5 Complete Electrical System: a 200Ah lithium bank, 50 amp DC to DC charger, MPPT controller, 2000VA inverter charger, hook up inlet, consumer unit, fuse board, battery monitor and cable.\u003c\/p\u003e\u003cp\u003eA complete electrical system sized for the way you use the van, with the batteries, charging and distribution designed together rather than bought one piece at a time. We size it from how many days you want to stay off grid and what you run, and we send the diagram with it. The T5 Transporter is the most converted van in the UK. Most parts carry over to the T6, and the listing says where they do not.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Transporter T5\u003c\/li\u003e\n\u003cli\u003eVan body: SWB and LWB low roof\u003c\/li\u003e\n\u003cli\u003eYears: 2003 to 2015\u003c\/li\u003e\n\u003cli\u003eSpecification: 200Ah lithium, 2000VA inverter charger, 50 amp DC to DC, 50 amp MPPT, mains hook up\u003c\/li\u003e\n\u003cli\u003eQuality: components from established makers with UK support\u003c\/li\u003e\n\u003cli\u003ePower draw: up to 160 amps through the inverter at full load\u003c\/li\u003e\n\u003cli\u003eWiring: sized cable throughout with a main fuse and isolator at the battery\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 3 days\u003c\/li\u003e\n\u003cli\u003eRegulations: mains hook up wiring must include an RCD and be installed by a competent person, with an electrical installation certificate recommended\u003c\/li\u003e\n\u003cli\u003eWeight: about 58 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: three years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLithium battery\u003c\/li\u003e\n\u003cli\u003eDC to DC charger\u003c\/li\u003e\n\u003cli\u003eMPPT controller\u003c\/li\u003e\n\u003cli\u003eInverter charger\u003c\/li\u003e\n\u003cli\u003eHook up inlet and consumer unit\u003c\/li\u003e\n\u003cli\u003eFuse board\u003c\/li\u003e\n\u003cli\u003eBattery monitor\u003c\/li\u003e\n\u003cli\u003eCable kit and diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eEvery positive cable is fused as close to the battery as possible, cable is sized for voltage drop rather than just current, and anything carrying mains voltage from an inverter or hook up goes through an RCD. If you are not confident with any of that, buy the fitted option; a badly wired 12V system can start a fire as easily as a mains one. Conversions are heavy. Batteries, water, furniture and insulation can add 500 to 800 kg, and a van that starts at 3.5 tonnes gross can end up overweight before anyone has packed a bag. Every listing states its weight, and it is worth weighing the empty van at a public weighbridge before the build begins. Tell your insurer about the conversion as it progresses, not afterwards. Since 2019 the DVLA has been strict about reclassifying vans as motor caravans on the V5C, and most specialist insurers will cover a converted van as a camper whatever the V5C says, provided they know what is in it. We supply and fit camper conversion parts for panel vans, and we build and live in our own. We are not Ford, Mercedes-Benz or Volkswagen and are not appointed by them; the van names describe fitment. Everything here is chosen for vans that get used all year, including the British winter, and we say plainly where a cheaper part would do the job.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered with our wiring diagram or fitting notes, for a self build or your own installer. Parts and Fitting is fitted at our workshop by our own installers, tested, and signed off with a written installation record.\u003c\/p\u003e","brand":"Vanlife Outfitters","offers":[{"title":"Parts Only","offer_id":58074447151486,"sku":"VLO-PWS-008-PO","price":2449.0,"currency_code":"GBP","in_stock":true},{"title":"Parts and Fitting","offer_id":58074447184254,"sku":"VLO-PWS-008-PAF","price":3124.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/8759\/0270\/files\/Transporter_T5_Complete_Electrical_System_7cdb8dc9-8170-4caf-8997-f3f52af01f9f.jpg?v=1790179287"},{"product_id":"transit-custom-pre-wire-package","title":"Transit Custom Pre Wire Package","description":"\u003cp\u003eTransit Custom Pre Wire Package: every cable for lights, sockets, fan, heater, pump and fridge run and labelled before the lining goes in.\u003c\/p\u003e\u003cp\u003eStage by stage packages for the parts of a build most people want done properly: the shell, the windows, the lining and the pre wire. Each package can be supplied for a self build or fitted at our workshop. The Transit Custom is the one tonne van that has replaced the Transporter on many UK driveways, with a flat load floor and a sensible roof rib layout for vents.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Transit Custom\u003c\/li\u003e\n\u003cli\u003eVan body: L1 and L2 low roof and high roof\u003c\/li\u003e\n\u003cli\u003eYears: 2012 on\u003c\/li\u003e\n\u003cli\u003eSpecification: full 12V and 230V pre wire to a labelled plan\u003c\/li\u003e\n\u003cli\u003eQuality: tinned copper cable sized for voltage drop\u003c\/li\u003e\n\u003cli\u003ePower draw: not applicable\u003c\/li\u003e\n\u003cli\u003eWiring: labelled cables to a drawn plan\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 2 days\u003c\/li\u003e\n\u003cli\u003eRegulations: mains hook up wiring must include an RCD and be installed by a competent person, with an electrical installation certificate recommended\u003c\/li\u003e\n\u003cli\u003eWeight: about 22 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: three years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCable\u003c\/li\u003e\n\u003cli\u003eConduit\u003c\/li\u003e\n\u003cli\u003eLabels\u003c\/li\u003e\n\u003cli\u003eWiring plan\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eEvery positive cable is fused as close to the battery as possible, cable is sized for voltage drop rather than just current, and anything carrying mains voltage from an inverter or hook up goes through an RCD. If you are not confident with any of that, buy the fitted option; a badly wired 12V system can start a fire as easily as a mains one. Conversions are heavy. Batteries, water, furniture and insulation can add 500 to 800 kg, and a van that starts at 3.5 tonnes gross can end up overweight before anyone has packed a bag. Every listing states its weight, and it is worth weighing the empty van at a public weighbridge before the build begins. Tell your insurer about the conversion as it progresses, not afterwards. Since 2019 the DVLA has been strict about reclassifying vans as motor caravans on the V5C, and most specialist insurers will cover a converted van as a camper whatever the V5C says, provided they know what is in it. We supply and fit camper conversion parts for panel vans, and we build and live in our own. We are not Ford, Mercedes-Benz or Volkswagen and are not appointed by them; the van names describe fitment. Everything here is chosen for vans that get used all year, including the British winter, and we say plainly where a cheaper part would do the job.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered with our wiring diagram or fitting notes, for a self build or your own installer. Parts and Fitting is fitted at our workshop by our own installers, tested, and signed off with a written installation record.\u003c\/p\u003e","brand":"Vanlife Outfitters","offers":[{"title":"Parts Only","offer_id":58074452984190,"sku":"VLO-BLD-033-PO","price":1124.0,"currency_code":"GBP","in_stock":true},{"title":"Parts and Fitting","offer_id":58074453016958,"sku":"VLO-BLD-033-PAF","price":1449.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"transit-pre-wire-package","title":"Transit Pre Wire Package","description":"\u003cp\u003eTransit Pre Wire Package: every cable for lights, sockets, fan, heater, pump and fridge run and labelled before the lining goes in.\u003c\/p\u003e\u003cp\u003eStage by stage packages for the parts of a build most people want done properly: the shell, the windows, the lining and the pre wire. Each package can be supplied for a self build or fitted at our workshop. The full size Transit gives the most usable width of the four at the price, and the high roof L3 is the most popular full size build we supply.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Transit\u003c\/li\u003e\n\u003cli\u003eVan body: L2 L3 and L4 medium and high roof\u003c\/li\u003e\n\u003cli\u003eYears: 2014 on\u003c\/li\u003e\n\u003cli\u003eSpecification: full 12V and 230V pre wire to a labelled plan\u003c\/li\u003e\n\u003cli\u003eQuality: tinned copper cable sized for voltage drop\u003c\/li\u003e\n\u003cli\u003ePower draw: not applicable\u003c\/li\u003e\n\u003cli\u003eWiring: labelled cables to a drawn plan\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 2 days\u003c\/li\u003e\n\u003cli\u003eRegulations: mains hook up wiring must include an RCD and be installed by a competent person, with an electrical installation certificate recommended\u003c\/li\u003e\n\u003cli\u003eWeight: about 22 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: three years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCable\u003c\/li\u003e\n\u003cli\u003eConduit\u003c\/li\u003e\n\u003cli\u003eLabels\u003c\/li\u003e\n\u003cli\u003eWiring plan\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eEvery positive cable is fused as close to the battery as possible, cable is sized for voltage drop rather than just current, and anything carrying mains voltage from an inverter or hook up goes through an RCD. If you are not confident with any of that, buy the fitted option; a badly wired 12V system can start a fire as easily as a mains one. Conversions are heavy. Batteries, water, furniture and insulation can add 500 to 800 kg, and a van that starts at 3.5 tonnes gross can end up overweight before anyone has packed a bag. Every listing states its weight, and it is worth weighing the empty van at a public weighbridge before the build begins. Tell your insurer about the conversion as it progresses, not afterwards. Since 2019 the DVLA has been strict about reclassifying vans as motor caravans on the V5C, and most specialist insurers will cover a converted van as a camper whatever the V5C says, provided they know what is in it. We supply and fit camper conversion parts for panel vans, and we build and live in our own. We are not Ford, Mercedes-Benz or Volkswagen and are not appointed by them; the van names describe fitment. Everything here is chosen for vans that get used all year, including the British winter, and we say plainly where a cheaper part would do the job.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered with our wiring diagram or fitting notes, for a self build or your own installer. Parts and Fitting is fitted at our workshop by our own installers, tested, and signed off with a written installation record.\u003c\/p\u003e","brand":"Vanlife Outfitters","offers":[{"title":"Parts Only","offer_id":58074453082494,"sku":"VLO-BLD-034-PO","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"Parts and Fitting","offer_id":58074453115262,"sku":"VLO-BLD-034-PAF","price":1624.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"sprinter-w907-pre-wire-package","title":"Sprinter W907 Pre Wire Package","description":"\u003cp\u003eSprinter W907 Pre Wire Package: every cable for lights, sockets, fan, heater, pump and fridge run and labelled before the lining goes in.\u003c\/p\u003e\u003cp\u003eStage by stage packages for the parts of a build most people want done properly: the shell, the windows, the lining and the pre wire. Each package can be supplied for a self build or fitted at our workshop. The W907 Sprinter has the best standing height and the best dealer network in Europe, and the most complicated electrics of the four, which matters when you tap into them.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Sprinter W907\u003c\/li\u003e\n\u003cli\u003eVan body: L2 L3 and L4 high roof\u003c\/li\u003e\n\u003cli\u003eYears: 2018 on\u003c\/li\u003e\n\u003cli\u003eSpecification: full 12V and 230V pre wire to a labelled plan\u003c\/li\u003e\n\u003cli\u003eQuality: tinned copper cable sized for voltage drop\u003c\/li\u003e\n\u003cli\u003ePower draw: not applicable\u003c\/li\u003e\n\u003cli\u003eWiring: labelled cables to a drawn plan\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 2 days\u003c\/li\u003e\n\u003cli\u003eRegulations: mains hook up wiring must include an RCD and be installed by a competent person, with an electrical installation certificate recommended\u003c\/li\u003e\n\u003cli\u003eWeight: about 22 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: three years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCable\u003c\/li\u003e\n\u003cli\u003eConduit\u003c\/li\u003e\n\u003cli\u003eLabels\u003c\/li\u003e\n\u003cli\u003eWiring plan\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eEvery positive cable is fused as close to the battery as possible, cable is sized for voltage drop rather than just current, and anything carrying mains voltage from an inverter or hook up goes through an RCD. If you are not confident with any of that, buy the fitted option; a badly wired 12V system can start a fire as easily as a mains one. Conversions are heavy. Batteries, water, furniture and insulation can add 500 to 800 kg, and a van that starts at 3.5 tonnes gross can end up overweight before anyone has packed a bag. Every listing states its weight, and it is worth weighing the empty van at a public weighbridge before the build begins. Tell your insurer about the conversion as it progresses, not afterwards. Since 2019 the DVLA has been strict about reclassifying vans as motor caravans on the V5C, and most specialist insurers will cover a converted van as a camper whatever the V5C says, provided they know what is in it. We supply and fit camper conversion parts for panel vans, and we build and live in our own. We are not Ford, Mercedes-Benz or Volkswagen and are not appointed by them; the van names describe fitment. Everything here is chosen for vans that get used all year, including the British winter, and we say plainly where a cheaper part would do the job.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered with our wiring diagram or fitting notes, for a self build or your own installer. Parts and Fitting is fitted at our workshop by our own installers, tested, and signed off with a written installation record.\u003c\/p\u003e","brand":"Vanlife Outfitters","offers":[{"title":"Parts Only","offer_id":58074453148030,"sku":"VLO-BLD-035-PO","price":1349.0,"currency_code":"GBP","in_stock":true},{"title":"Parts and Fitting","offer_id":58074453180798,"sku":"VLO-BLD-035-PAF","price":1724.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"sprinter-w906-pre-wire-package","title":"Sprinter W906 Pre Wire Package","description":"\u003cp\u003eSprinter W906 Pre Wire Package: every cable for lights, sockets, fan, heater, pump and fridge run and labelled before the lining goes in.\u003c\/p\u003e\u003cp\u003eStage by stage packages for the parts of a build most people want done properly: the shell, the windows, the lining and the pre wire. Each package can be supplied for a self build or fitted at our workshop. The W906 Sprinter is the most common secondhand base for a build. Check the sills, the rear arches and the door bottoms before you spend money on the inside.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Sprinter W906\u003c\/li\u003e\n\u003cli\u003eVan body: MWB and LWB high roof\u003c\/li\u003e\n\u003cli\u003eYears: 2006 to 2018\u003c\/li\u003e\n\u003cli\u003eSpecification: full 12V and 230V pre wire to a labelled plan\u003c\/li\u003e\n\u003cli\u003eQuality: tinned copper cable sized for voltage drop\u003c\/li\u003e\n\u003cli\u003ePower draw: not applicable\u003c\/li\u003e\n\u003cli\u003eWiring: labelled cables to a drawn plan\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 2 days\u003c\/li\u003e\n\u003cli\u003eRegulations: mains hook up wiring must include an RCD and be installed by a competent person, with an electrical installation certificate recommended\u003c\/li\u003e\n\u003cli\u003eWeight: about 22 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: three years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCable\u003c\/li\u003e\n\u003cli\u003eConduit\u003c\/li\u003e\n\u003cli\u003eLabels\u003c\/li\u003e\n\u003cli\u003eWiring plan\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eEvery positive cable is fused as close to the battery as possible, cable is sized for voltage drop rather than just current, and anything carrying mains voltage from an inverter or hook up goes through an RCD. If you are not confident with any of that, buy the fitted option; a badly wired 12V system can start a fire as easily as a mains one. Conversions are heavy. Batteries, water, furniture and insulation can add 500 to 800 kg, and a van that starts at 3.5 tonnes gross can end up overweight before anyone has packed a bag. Every listing states its weight, and it is worth weighing the empty van at a public weighbridge before the build begins. Tell your insurer about the conversion as it progresses, not afterwards. Since 2019 the DVLA has been strict about reclassifying vans as motor caravans on the V5C, and most specialist insurers will cover a converted van as a camper whatever the V5C says, provided they know what is in it. We supply and fit camper conversion parts for panel vans, and we build and live in our own. We are not Ford, Mercedes-Benz or Volkswagen and are not appointed by them; the van names describe fitment. Everything here is chosen for vans that get used all year, including the British winter, and we say plainly where a cheaper part would do the job.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered with our wiring diagram or fitting notes, for a self build or your own installer. Parts and Fitting is fitted at our workshop by our own installers, tested, and signed off with a written installation record.\u003c\/p\u003e","brand":"Vanlife Outfitters","offers":[{"title":"Parts Only","offer_id":58074453213566,"sku":"VLO-BLD-036-PO","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"Parts and Fitting","offer_id":58074453246334,"sku":"VLO-BLD-036-PAF","price":1624.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"crafter-mk2-pre-wire-package","title":"Crafter Mk2 Pre Wire Package","description":"\u003cp\u003eCrafter Mk2 Pre Wire Package: every cable for lights, sockets, fan, heater, pump and fridge run and labelled before the lining goes in.\u003c\/p\u003e\u003cp\u003eStage by stage packages for the parts of a build most people want done properly: the shell, the windows, the lining and the pre wire. Each package can be supplied for a self build or fitted at our workshop. The Mk2 Crafter is the widest of the four inside and its flat walls make lining and furniture simpler than on any other van here.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Crafter Mk2\u003c\/li\u003e\n\u003cli\u003eVan body: MWB and LWB high roof\u003c\/li\u003e\n\u003cli\u003eYears: 2017 on\u003c\/li\u003e\n\u003cli\u003eSpecification: full 12V and 230V pre wire to a labelled plan\u003c\/li\u003e\n\u003cli\u003eQuality: tinned copper cable sized for voltage drop\u003c\/li\u003e\n\u003cli\u003ePower draw: not applicable\u003c\/li\u003e\n\u003cli\u003eWiring: labelled cables to a drawn plan\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 2 days\u003c\/li\u003e\n\u003cli\u003eRegulations: mains hook up wiring must include an RCD and be installed by a competent person, with an electrical installation certificate recommended\u003c\/li\u003e\n\u003cli\u003eWeight: about 22 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: three years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCable\u003c\/li\u003e\n\u003cli\u003eConduit\u003c\/li\u003e\n\u003cli\u003eLabels\u003c\/li\u003e\n\u003cli\u003eWiring plan\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eEvery positive cable is fused as close to the battery as possible, cable is sized for voltage drop rather than just current, and anything carrying mains voltage from an inverter or hook up goes through an RCD. If you are not confident with any of that, buy the fitted option; a badly wired 12V system can start a fire as easily as a mains one. Conversions are heavy. Batteries, water, furniture and insulation can add 500 to 800 kg, and a van that starts at 3.5 tonnes gross can end up overweight before anyone has packed a bag. Every listing states its weight, and it is worth weighing the empty van at a public weighbridge before the build begins. Tell your insurer about the conversion as it progresses, not afterwards. Since 2019 the DVLA has been strict about reclassifying vans as motor caravans on the V5C, and most specialist insurers will cover a converted van as a camper whatever the V5C says, provided they know what is in it. We supply and fit camper conversion parts for panel vans, and we build and live in our own. We are not Ford, Mercedes-Benz or Volkswagen and are not appointed by them; the van names describe fitment. Everything here is chosen for vans that get used all year, including the British winter, and we say plainly where a cheaper part would do the job.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered with our wiring diagram or fitting notes, for a self build or your own installer. Parts and Fitting is fitted at our workshop by our own installers, tested, and signed off with a written installation record.\u003c\/p\u003e","brand":"Vanlife Outfitters","offers":[{"title":"Parts Only","offer_id":58074453279102,"sku":"VLO-BLD-037-PO","price":1324.0,"currency_code":"GBP","in_stock":true},{"title":"Parts and Fitting","offer_id":58074453311870,"sku":"VLO-BLD-037-PAF","price":1674.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"crafter-mk1-pre-wire-package","title":"Crafter Mk1 Pre Wire Package","description":"\u003cp\u003eCrafter Mk1 Pre Wire Package: every cable for lights, sockets, fan, heater, pump and fridge run and labelled before the lining goes in.\u003c\/p\u003e\u003cp\u003eStage by stage packages for the parts of a build most people want done properly: the shell, the windows, the lining and the pre wire. Each package can be supplied for a self build or fitted at our workshop. The Mk1 Crafter shares its body with the W906 Sprinter, so most Sprinter W906 parts fit, and we list both where they do.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Crafter Mk1\u003c\/li\u003e\n\u003cli\u003eVan body: MWB and LWB high roof\u003c\/li\u003e\n\u003cli\u003eYears: 2006 to 2016\u003c\/li\u003e\n\u003cli\u003eSpecification: full 12V and 230V pre wire to a labelled plan\u003c\/li\u003e\n\u003cli\u003eQuality: tinned copper cable sized for voltage drop\u003c\/li\u003e\n\u003cli\u003ePower draw: not applicable\u003c\/li\u003e\n\u003cli\u003eWiring: labelled cables to a drawn plan\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 2 days\u003c\/li\u003e\n\u003cli\u003eRegulations: mains hook up wiring must include an RCD and be installed by a competent person, with an electrical installation certificate recommended\u003c\/li\u003e\n\u003cli\u003eWeight: about 22 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: three years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCable\u003c\/li\u003e\n\u003cli\u003eConduit\u003c\/li\u003e\n\u003cli\u003eLabels\u003c\/li\u003e\n\u003cli\u003eWiring plan\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eEvery positive cable is fused as close to the battery as possible, cable is sized for voltage drop rather than just current, and anything carrying mains voltage from an inverter or hook up goes through an RCD. If you are not confident with any of that, buy the fitted option; a badly wired 12V system can start a fire as easily as a mains one. Conversions are heavy. Batteries, water, furniture and insulation can add 500 to 800 kg, and a van that starts at 3.5 tonnes gross can end up overweight before anyone has packed a bag. Every listing states its weight, and it is worth weighing the empty van at a public weighbridge before the build begins. Tell your insurer about the conversion as it progresses, not afterwards. Since 2019 the DVLA has been strict about reclassifying vans as motor caravans on the V5C, and most specialist insurers will cover a converted van as a camper whatever the V5C says, provided they know what is in it. We supply and fit camper conversion parts for panel vans, and we build and live in our own. We are not Ford, Mercedes-Benz or Volkswagen and are not appointed by them; the van names describe fitment. Everything here is chosen for vans that get used all year, including the British winter, and we say plainly where a cheaper part would do the job.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered with our wiring diagram or fitting notes, for a self build or your own installer. Parts and Fitting is fitted at our workshop by our own installers, tested, and signed off with a written installation record.\u003c\/p\u003e","brand":"Vanlife Outfitters","offers":[{"title":"Parts Only","offer_id":58074453377406,"sku":"VLO-BLD-038-PO","price":1224.0,"currency_code":"GBP","in_stock":true},{"title":"Parts and Fitting","offer_id":58074453410174,"sku":"VLO-BLD-038-PAF","price":1549.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"transporter-t6-and-t6-1-pre-wire-package","title":"Transporter T6 and T6.1 Pre Wire Package","description":"\u003cp\u003eTransporter T6 and T6.1 Pre Wire Package: every cable for lights, sockets, fan, heater, pump and fridge run and labelled before the lining goes in.\u003c\/p\u003e\u003cp\u003eStage by stage packages for the parts of a build most people want done properly: the shell, the windows, the lining and the pre wire. Each package can be supplied for a self build or fitted at our workshop. The T6 and T6.1 Transporter is the classic small camper base. Space is tight, so every part here is chosen for size as well as capacity.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Transporter T6 and T6.1\u003c\/li\u003e\n\u003cli\u003eVan body: SWB and LWB low roof\u003c\/li\u003e\n\u003cli\u003eYears: 2015 on\u003c\/li\u003e\n\u003cli\u003eSpecification: full 12V and 230V pre wire to a labelled plan\u003c\/li\u003e\n\u003cli\u003eQuality: tinned copper cable sized for voltage drop\u003c\/li\u003e\n\u003cli\u003ePower draw: not applicable\u003c\/li\u003e\n\u003cli\u003eWiring: labelled cables to a drawn plan\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 2 days\u003c\/li\u003e\n\u003cli\u003eRegulations: mains hook up wiring must include an RCD and be installed by a competent person, with an electrical installation certificate recommended\u003c\/li\u003e\n\u003cli\u003eWeight: about 22 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: three years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCable\u003c\/li\u003e\n\u003cli\u003eConduit\u003c\/li\u003e\n\u003cli\u003eLabels\u003c\/li\u003e\n\u003cli\u003eWiring plan\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eEvery positive cable is fused as close to the battery as possible, cable is sized for voltage drop rather than just current, and anything carrying mains voltage from an inverter or hook up goes through an RCD. If you are not confident with any of that, buy the fitted option; a badly wired 12V system can start a fire as easily as a mains one. Conversions are heavy. Batteries, water, furniture and insulation can add 500 to 800 kg, and a van that starts at 3.5 tonnes gross can end up overweight before anyone has packed a bag. Every listing states its weight, and it is worth weighing the empty van at a public weighbridge before the build begins. Tell your insurer about the conversion as it progresses, not afterwards. Since 2019 the DVLA has been strict about reclassifying vans as motor caravans on the V5C, and most specialist insurers will cover a converted van as a camper whatever the V5C says, provided they know what is in it. We supply and fit camper conversion parts for panel vans, and we build and live in our own. We are not Ford, Mercedes-Benz or Volkswagen and are not appointed by them; the van names describe fitment. Everything here is chosen for vans that get used all year, including the British winter, and we say plainly where a cheaper part would do the job.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered with our wiring diagram or fitting notes, for a self build or your own installer. Parts and Fitting is fitted at our workshop by our own installers, tested, and signed off with a written installation record.\u003c\/p\u003e","brand":"Vanlife Outfitters","offers":[{"title":"Parts Only","offer_id":58074453442942,"sku":"VLO-BLD-039-PO","price":1174.0,"currency_code":"GBP","in_stock":true},{"title":"Parts and Fitting","offer_id":58074453475710,"sku":"VLO-BLD-039-PAF","price":1499.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"transporter-t5-pre-wire-package","title":"Transporter T5 Pre Wire Package","description":"\u003cp\u003eTransporter T5 Pre Wire Package: every cable for lights, sockets, fan, heater, pump and fridge run and labelled before the lining goes in.\u003c\/p\u003e\u003cp\u003eStage by stage packages for the parts of a build most people want done properly: the shell, the windows, the lining and the pre wire. Each package can be supplied for a self build or fitted at our workshop. The T5 Transporter is the most converted van in the UK. Most parts carry over to the T6, and the listing says where they do not.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Transporter T5\u003c\/li\u003e\n\u003cli\u003eVan body: SWB and LWB low roof\u003c\/li\u003e\n\u003cli\u003eYears: 2003 to 2015\u003c\/li\u003e\n\u003cli\u003eSpecification: full 12V and 230V pre wire to a labelled plan\u003c\/li\u003e\n\u003cli\u003eQuality: tinned copper cable sized for voltage drop\u003c\/li\u003e\n\u003cli\u003ePower draw: not applicable\u003c\/li\u003e\n\u003cli\u003eWiring: labelled cables to a drawn plan\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 2 days\u003c\/li\u003e\n\u003cli\u003eRegulations: mains hook up wiring must include an RCD and be installed by a competent person, with an electrical installation certificate recommended\u003c\/li\u003e\n\u003cli\u003eWeight: about 22 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: three years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCable\u003c\/li\u003e\n\u003cli\u003eConduit\u003c\/li\u003e\n\u003cli\u003eLabels\u003c\/li\u003e\n\u003cli\u003eWiring plan\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eEvery positive cable is fused as close to the battery as possible, cable is sized for voltage drop rather than just current, and anything carrying mains voltage from an inverter or hook up goes through an RCD. If you are not confident with any of that, buy the fitted option; a badly wired 12V system can start a fire as easily as a mains one. Conversions are heavy. Batteries, water, furniture and insulation can add 500 to 800 kg, and a van that starts at 3.5 tonnes gross can end up overweight before anyone has packed a bag. Every listing states its weight, and it is worth weighing the empty van at a public weighbridge before the build begins. Tell your insurer about the conversion as it progresses, not afterwards. Since 2019 the DVLA has been strict about reclassifying vans as motor caravans on the V5C, and most specialist insurers will cover a converted van as a camper whatever the V5C says, provided they know what is in it. We supply and fit camper conversion parts for panel vans, and we build and live in our own. We are not Ford, Mercedes-Benz or Volkswagen and are not appointed by them; the van names describe fitment. Everything here is chosen for vans that get used all year, including the British winter, and we say plainly where a cheaper part would do the job.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered with our wiring diagram or fitting notes, for a self build or your own installer. Parts and Fitting is fitted at our workshop by our own installers, tested, and signed off with a written installation record.\u003c\/p\u003e","brand":"Vanlife Outfitters","offers":[{"title":"Parts Only","offer_id":58074453574014,"sku":"VLO-BLD-040-PO","price":1124.0,"currency_code":"GBP","in_stock":true},{"title":"Parts and Fitting","offer_id":58074453606782,"sku":"VLO-BLD-040-PAF","price":1449.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"complete-power-system-with-200ah-lithium-and-1600va-inverter","title":"Complete Power System with 200Ah Lithium and 1600VA Inverter","description":"\u003cp\u003eComplete Power System with 200Ah Lithium and 1600VA Inverter: a pre designed system with 200Ah of lithium, a 1600VA inverter charger, DC to DC charger, MPPT controller, battery monitor and a fused distribution board.\u003c\/p\u003e\u003cp\u003eA complete electrical system sized for the way you use the van, with the batteries, charging and distribution designed together rather than bought one piece at a time. We size it from how many days you want to stay off grid and what you run, and we send the diagram with it. This part is not van specific, and the listing says where the mounting position matters.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Transit, Transit Custom, Sprinter, Crafter and Transporter builds, and most other panel vans\u003c\/li\u003e\n\u003cli\u003eVan body: not van specific\u003c\/li\u003e\n\u003cli\u003eYears: current range\u003c\/li\u003e\n\u003cli\u003eSpecification: 200Ah lithium, 1600VA inverter charger, 50 amp DC to DC, 50 amp MPPT\u003c\/li\u003e\n\u003cli\u003eQuality: established makers with UK support\u003c\/li\u003e\n\u003cli\u003ePower draw: up to 145 amps at full inverter load\u003c\/li\u003e\n\u003cli\u003eWiring: full cable kit with fuses and isolators and a wiring diagram\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 2 to 3 days\u003c\/li\u003e\n\u003cli\u003eRegulations: mains hook up wiring must include an RCD and be installed by a competent person, with an electrical installation certificate recommended\u003c\/li\u003e\n\u003cli\u003eWeight: about 45 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: three years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBatteries\u003c\/li\u003e\n\u003cli\u003eInverter charger\u003c\/li\u003e\n\u003cli\u003eDC to DC charger\u003c\/li\u003e\n\u003cli\u003eMPPT\u003c\/li\u003e\n\u003cli\u003eMonitor\u003c\/li\u003e\n\u003cli\u003eDistribution board\u003c\/li\u003e\n\u003cli\u003eCable kit\u003c\/li\u003e\n\u003cli\u003eDiagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eEvery positive cable is fused as close to the battery as possible, cable is sized for voltage drop rather than just current, and anything carrying mains voltage from an inverter or hook up goes through an RCD. If you are not confident with any of that, buy the fitted option; a badly wired 12V system can start a fire as easily as a mains one. Lithium iron phosphate batteries weigh about half as much as lead acid for the same usable capacity and can be run much flatter without damage. They must not be charged below freezing, which is why the self heating versions exist and why they are worth it in a van that is used in winter. They also need a charger and a DC to DC charger with a lithium profile. Conversions are heavy. Batteries, water, furniture and insulation can add 500 to 800 kg, and a van that starts at 3.5 tonnes gross can end up overweight before anyone has packed a bag. Every listing states its weight, and it is worth weighing the empty van at a public weighbridge before the build begins. Tell your insurer about the conversion as it progresses, not afterwards. Since 2019 the DVLA has been strict about reclassifying vans as motor caravans on the V5C, and most specialist insurers will cover a converted van as a camper whatever the V5C says, provided they know what is in it. We supply and fit camper conversion parts for panel vans, and we build and live in our own. We are not Ford, Mercedes-Benz or Volkswagen and are not appointed by them; the van names describe fitment. Everything here is chosen for vans that get used all year, including the British winter, and we say plainly where a cheaper part would do the job.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered with our wiring diagram or fitting notes, for a self build or your own installer. There is one version of this because it is the one we fit in our own vans.\u003c\/p\u003e","brand":"Vanlife Outfitters","offers":[{"title":"Default Title","offer_id":58074465862014,"sku":"VLO-PWS-017","price":2299.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/8759\/0270\/files\/Complete_Power_System_with_200Ah_Lithium_and_1600VA_Inverter_4be54444-fbbb-4754-b6a3-407fd62f557f.jpg?v=1790179546"},{"product_id":"complete-power-system-with-200ah-lithium-and-2000va-inverter","title":"Complete Power System with 200Ah Lithium and 2000VA Inverter","description":"\u003cp\u003eComplete Power System with 200Ah Lithium and 2000VA Inverter: a pre designed system with 200Ah of lithium, a 2000VA inverter charger, DC to DC charger, MPPT controller, battery monitor and a fused distribution board.\u003c\/p\u003e\u003cp\u003eA complete electrical system sized for the way you use the van, with the batteries, charging and distribution designed together rather than bought one piece at a time. We size it from how many days you want to stay off grid and what you run, and we send the diagram with it. This part is not van specific, and the listing says where the mounting position matters.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Transit, Transit Custom, Sprinter, Crafter and Transporter builds, and most other panel vans\u003c\/li\u003e\n\u003cli\u003eVan body: not van specific\u003c\/li\u003e\n\u003cli\u003eYears: current range\u003c\/li\u003e\n\u003cli\u003eSpecification: 200Ah lithium, 2000VA inverter charger, 50 amp DC to DC, 50 amp MPPT\u003c\/li\u003e\n\u003cli\u003eQuality: established makers with UK support\u003c\/li\u003e\n\u003cli\u003ePower draw: up to 181 amps at full inverter load\u003c\/li\u003e\n\u003cli\u003eWiring: full cable kit with fuses and isolators and a wiring diagram\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 2 to 3 days\u003c\/li\u003e\n\u003cli\u003eRegulations: mains hook up wiring must include an RCD and be installed by a competent person, with an electrical installation certificate recommended\u003c\/li\u003e\n\u003cli\u003eWeight: about 45 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: three years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBatteries\u003c\/li\u003e\n\u003cli\u003eInverter charger\u003c\/li\u003e\n\u003cli\u003eDC to DC charger\u003c\/li\u003e\n\u003cli\u003eMPPT\u003c\/li\u003e\n\u003cli\u003eMonitor\u003c\/li\u003e\n\u003cli\u003eDistribution board\u003c\/li\u003e\n\u003cli\u003eCable kit\u003c\/li\u003e\n\u003cli\u003eDiagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eEvery positive cable is fused as close to the battery as possible, cable is sized for voltage drop rather than just current, and anything carrying mains voltage from an inverter or hook up goes through an RCD. If you are not confident with any of that, buy the fitted option; a badly wired 12V system can start a fire as easily as a mains one. Lithium iron phosphate batteries weigh about half as much as lead acid for the same usable capacity and can be run much flatter without damage. They must not be charged below freezing, which is why the self heating versions exist and why they are worth it in a van that is used in winter. They also need a charger and a DC to DC charger with a lithium profile. Conversions are heavy. Batteries, water, furniture and insulation can add 500 to 800 kg, and a van that starts at 3.5 tonnes gross can end up overweight before anyone has packed a bag. Every listing states its weight, and it is worth weighing the empty van at a public weighbridge before the build begins. Tell your insurer about the conversion as it progresses, not afterwards. Since 2019 the DVLA has been strict about reclassifying vans as motor caravans on the V5C, and most specialist insurers will cover a converted van as a camper whatever the V5C says, provided they know what is in it. We supply and fit camper conversion parts for panel vans, and we build and live in our own. We are not Ford, Mercedes-Benz or Volkswagen and are not appointed by them; the van names describe fitment. Everything here is chosen for vans that get used all year, including the British winter, and we say plainly where a cheaper part would do the job.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered with our wiring diagram or fitting notes, for a self build or your own installer. There is one version of this because it is the one we fit in our own vans.\u003c\/p\u003e","brand":"Vanlife Outfitters","offers":[{"title":"Default Title","offer_id":58074465894782,"sku":"VLO-PWS-018","price":2449.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/8759\/0270\/files\/Complete_Power_System_with_200Ah_Lithium_and_2000VA_Inverter_a3d5ff5c-a3d7-4426-94fd-5a4fad1cd9ed.jpg?v=1790179545"},{"product_id":"complete-power-system-with-200ah-lithium-and-3000va-inverter","title":"Complete Power System with 200Ah Lithium and 3000VA Inverter","description":"\u003cp\u003eComplete Power System with 200Ah Lithium and 3000VA Inverter: a pre designed system with 200Ah of lithium, a 3000VA inverter charger, DC to DC charger, MPPT controller, battery monitor and a fused distribution board.\u003c\/p\u003e\u003cp\u003eA complete electrical system sized for the way you use the van, with the batteries, charging and distribution designed together rather than bought one piece at a time. We size it from how many days you want to stay off grid and what you run, and we send the diagram with it. This part is not van specific, and the listing says where the mounting position matters.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Transit, Transit Custom, Sprinter, Crafter and Transporter builds, and most other panel vans\u003c\/li\u003e\n\u003cli\u003eVan body: not van specific\u003c\/li\u003e\n\u003cli\u003eYears: current range\u003c\/li\u003e\n\u003cli\u003eSpecification: 200Ah lithium, 3000VA inverter charger, 50 amp DC to DC, 50 amp MPPT\u003c\/li\u003e\n\u003cli\u003eQuality: established makers with UK support\u003c\/li\u003e\n\u003cli\u003ePower draw: up to 272 amps at full inverter load\u003c\/li\u003e\n\u003cli\u003eWiring: full cable kit with fuses and isolators and a wiring diagram\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 2 to 3 days\u003c\/li\u003e\n\u003cli\u003eRegulations: mains hook up wiring must include an RCD and be installed by a competent person, with an electrical installation certificate recommended\u003c\/li\u003e\n\u003cli\u003eWeight: about 45 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: three years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBatteries\u003c\/li\u003e\n\u003cli\u003eInverter charger\u003c\/li\u003e\n\u003cli\u003eDC to DC charger\u003c\/li\u003e\n\u003cli\u003eMPPT\u003c\/li\u003e\n\u003cli\u003eMonitor\u003c\/li\u003e\n\u003cli\u003eDistribution board\u003c\/li\u003e\n\u003cli\u003eCable kit\u003c\/li\u003e\n\u003cli\u003eDiagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eEvery positive cable is fused as close to the battery as possible, cable is sized for voltage drop rather than just current, and anything carrying mains voltage from an inverter or hook up goes through an RCD. If you are not confident with any of that, buy the fitted option; a badly wired 12V system can start a fire as easily as a mains one. Lithium iron phosphate batteries weigh about half as much as lead acid for the same usable capacity and can be run much flatter without damage. They must not be charged below freezing, which is why the self heating versions exist and why they are worth it in a van that is used in winter. They also need a charger and a DC to DC charger with a lithium profile. Conversions are heavy. Batteries, water, furniture and insulation can add 500 to 800 kg, and a van that starts at 3.5 tonnes gross can end up overweight before anyone has packed a bag. Every listing states its weight, and it is worth weighing the empty van at a public weighbridge before the build begins. Tell your insurer about the conversion as it progresses, not afterwards. Since 2019 the DVLA has been strict about reclassifying vans as motor caravans on the V5C, and most specialist insurers will cover a converted van as a camper whatever the V5C says, provided they know what is in it. We supply and fit camper conversion parts for panel vans, and we build and live in our own. We are not Ford, Mercedes-Benz or Volkswagen and are not appointed by them; the van names describe fitment. Everything here is chosen for vans that get used all year, including the British winter, and we say plainly where a cheaper part would do the job.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered with our wiring diagram or fitting notes, for a self build or your own installer. There is one version of this because it is the one we fit in our own vans.\u003c\/p\u003e","brand":"Vanlife Outfitters","offers":[{"title":"Default Title","offer_id":58074465927550,"sku":"VLO-PWS-019","price":2749.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/8759\/0270\/files\/Complete_Power_System_with_200Ah_Lithium_and_3000VA_Inverter_92e895e7-5171-4369-95c7-e98af99c9e4e.jpg?v=1790179546"},{"product_id":"complete-power-system-with-300ah-lithium-and-1600va-inverter","title":"Complete Power System with 300Ah Lithium and 1600VA Inverter","description":"\u003cp\u003eComplete Power System with 300Ah Lithium and 1600VA Inverter: a pre designed system with 300Ah of lithium, a 1600VA inverter charger, DC to DC charger, MPPT controller, battery monitor and a fused distribution board.\u003c\/p\u003e\u003cp\u003eA complete electrical system sized for the way you use the van, with the batteries, charging and distribution designed together rather than bought one piece at a time. We size it from how many days you want to stay off grid and what you run, and we send the diagram with it. This part is not van specific, and the listing says where the mounting position matters.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Transit, Transit Custom, Sprinter, Crafter and Transporter builds, and most other panel vans\u003c\/li\u003e\n\u003cli\u003eVan body: not van specific\u003c\/li\u003e\n\u003cli\u003eYears: current range\u003c\/li\u003e\n\u003cli\u003eSpecification: 300Ah lithium, 1600VA inverter charger, 50 amp DC to DC, 50 amp MPPT\u003c\/li\u003e\n\u003cli\u003eQuality: established makers with UK support\u003c\/li\u003e\n\u003cli\u003ePower draw: up to 145 amps at full inverter load\u003c\/li\u003e\n\u003cli\u003eWiring: full cable kit with fuses and isolators and a wiring diagram\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 2 to 3 days\u003c\/li\u003e\n\u003cli\u003eRegulations: mains hook up wiring must include an RCD and be installed by a competent person, with an electrical installation certificate recommended\u003c\/li\u003e\n\u003cli\u003eWeight: about 55 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: three years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBatteries\u003c\/li\u003e\n\u003cli\u003eInverter charger\u003c\/li\u003e\n\u003cli\u003eDC to DC charger\u003c\/li\u003e\n\u003cli\u003eMPPT\u003c\/li\u003e\n\u003cli\u003eMonitor\u003c\/li\u003e\n\u003cli\u003eDistribution board\u003c\/li\u003e\n\u003cli\u003eCable kit\u003c\/li\u003e\n\u003cli\u003eDiagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eEvery positive cable is fused as close to the battery as possible, cable is sized for voltage drop rather than just current, and anything carrying mains voltage from an inverter or hook up goes through an RCD. If you are not confident with any of that, buy the fitted option; a badly wired 12V system can start a fire as easily as a mains one. Lithium iron phosphate batteries weigh about half as much as lead acid for the same usable capacity and can be run much flatter without damage. They must not be charged below freezing, which is why the self heating versions exist and why they are worth it in a van that is used in winter. They also need a charger and a DC to DC charger with a lithium profile. Conversions are heavy. Batteries, water, furniture and insulation can add 500 to 800 kg, and a van that starts at 3.5 tonnes gross can end up overweight before anyone has packed a bag. Every listing states its weight, and it is worth weighing the empty van at a public weighbridge before the build begins. Tell your insurer about the conversion as it progresses, not afterwards. Since 2019 the DVLA has been strict about reclassifying vans as motor caravans on the V5C, and most specialist insurers will cover a converted van as a camper whatever the V5C says, provided they know what is in it. We supply and fit camper conversion parts for panel vans, and we build and live in our own. We are not Ford, Mercedes-Benz or Volkswagen and are not appointed by them; the van names describe fitment. Everything here is chosen for vans that get used all year, including the British winter, and we say plainly where a cheaper part would do the job.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered with our wiring diagram or fitting notes, for a self build or your own installer. There is one version of this because it is the one we fit in our own vans.\u003c\/p\u003e","brand":"Vanlife Outfitters","offers":[{"title":"Default Title","offer_id":58074465960318,"sku":"VLO-PWS-020","price":2749.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/8759\/0270\/files\/Complete_Power_System_with_300Ah_Lithium_and_1600VA_Inverter_1b7a14af-f524-4c36-83e0-9f178e931863.jpg?v=1790179546"},{"product_id":"complete-power-system-with-300ah-lithium-and-2000va-inverter","title":"Complete Power System with 300Ah Lithium and 2000VA Inverter","description":"\u003cp\u003eComplete Power System with 300Ah Lithium and 2000VA Inverter: a pre designed system with 300Ah of lithium, a 2000VA inverter charger, DC to DC charger, MPPT controller, battery monitor and a fused distribution board.\u003c\/p\u003e\u003cp\u003eA complete electrical system sized for the way you use the van, with the batteries, charging and distribution designed together rather than bought one piece at a time. We size it from how many days you want to stay off grid and what you run, and we send the diagram with it. This part is not van specific, and the listing says where the mounting position matters.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Transit, Transit Custom, Sprinter, Crafter and Transporter builds, and most other panel vans\u003c\/li\u003e\n\u003cli\u003eVan body: not van specific\u003c\/li\u003e\n\u003cli\u003eYears: current range\u003c\/li\u003e\n\u003cli\u003eSpecification: 300Ah lithium, 2000VA inverter charger, 50 amp DC to DC, 50 amp MPPT\u003c\/li\u003e\n\u003cli\u003eQuality: established makers with UK support\u003c\/li\u003e\n\u003cli\u003ePower draw: up to 181 amps at full inverter load\u003c\/li\u003e\n\u003cli\u003eWiring: full cable kit with fuses and isolators and a wiring diagram\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 2 to 3 days\u003c\/li\u003e\n\u003cli\u003eRegulations: mains hook up wiring must include an RCD and be installed by a competent person, with an electrical installation certificate recommended\u003c\/li\u003e\n\u003cli\u003eWeight: about 55 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: three years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBatteries\u003c\/li\u003e\n\u003cli\u003eInverter charger\u003c\/li\u003e\n\u003cli\u003eDC to DC charger\u003c\/li\u003e\n\u003cli\u003eMPPT\u003c\/li\u003e\n\u003cli\u003eMonitor\u003c\/li\u003e\n\u003cli\u003eDistribution board\u003c\/li\u003e\n\u003cli\u003eCable kit\u003c\/li\u003e\n\u003cli\u003eDiagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eEvery positive cable is fused as close to the battery as possible, cable is sized for voltage drop rather than just current, and anything carrying mains voltage from an inverter or hook up goes through an RCD. If you are not confident with any of that, buy the fitted option; a badly wired 12V system can start a fire as easily as a mains one. Lithium iron phosphate batteries weigh about half as much as lead acid for the same usable capacity and can be run much flatter without damage. They must not be charged below freezing, which is why the self heating versions exist and why they are worth it in a van that is used in winter. They also need a charger and a DC to DC charger with a lithium profile. Conversions are heavy. Batteries, water, furniture and insulation can add 500 to 800 kg, and a van that starts at 3.5 tonnes gross can end up overweight before anyone has packed a bag. Every listing states its weight, and it is worth weighing the empty van at a public weighbridge before the build begins. Tell your insurer about the conversion as it progresses, not afterwards. Since 2019 the DVLA has been strict about reclassifying vans as motor caravans on the V5C, and most specialist insurers will cover a converted van as a camper whatever the V5C says, provided they know what is in it. We supply and fit camper conversion parts for panel vans, and we build and live in our own. We are not Ford, Mercedes-Benz or Volkswagen and are not appointed by them; the van names describe fitment. Everything here is chosen for vans that get used all year, including the British winter, and we say plainly where a cheaper part would do the job.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered with our wiring diagram or fitting notes, for a self build or your own installer. There is one version of this because it is the one we fit in our own vans.\u003c\/p\u003e","brand":"Vanlife Outfitters","offers":[{"title":"Default Title","offer_id":58074466058622,"sku":"VLO-PWS-021","price":2899.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/8759\/0270\/files\/Complete_Power_System_with_300Ah_Lithium_and_2000VA_Inverter_97e9bb4e-48b0-4e28-8501-d4413a5827eb.jpg?v=1790179546"},{"product_id":"complete-power-system-with-300ah-lithium-and-3000va-inverter","title":"Complete Power System with 300Ah Lithium and 3000VA Inverter","description":"\u003cp\u003eComplete Power System with 300Ah Lithium and 3000VA Inverter: a pre designed system with 300Ah of lithium, a 3000VA inverter charger, DC to DC charger, MPPT controller, battery monitor and a fused distribution board.\u003c\/p\u003e\u003cp\u003eA complete electrical system sized for the way you use the van, with the batteries, charging and distribution designed together rather than bought one piece at a time. We size it from how many days you want to stay off grid and what you run, and we send the diagram with it. This part is not van specific, and the listing says where the mounting position matters.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Transit, Transit Custom, Sprinter, Crafter and Transporter builds, and most other panel vans\u003c\/li\u003e\n\u003cli\u003eVan body: not van specific\u003c\/li\u003e\n\u003cli\u003eYears: current range\u003c\/li\u003e\n\u003cli\u003eSpecification: 300Ah lithium, 3000VA inverter charger, 50 amp DC to DC, 50 amp MPPT\u003c\/li\u003e\n\u003cli\u003eQuality: established makers with UK support\u003c\/li\u003e\n\u003cli\u003ePower draw: up to 272 amps at full inverter load\u003c\/li\u003e\n\u003cli\u003eWiring: full cable kit with fuses and isolators and a wiring diagram\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 2 to 3 days\u003c\/li\u003e\n\u003cli\u003eRegulations: mains hook up wiring must include an RCD and be installed by a competent person, with an electrical installation certificate recommended\u003c\/li\u003e\n\u003cli\u003eWeight: about 55 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: three years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBatteries\u003c\/li\u003e\n\u003cli\u003eInverter charger\u003c\/li\u003e\n\u003cli\u003eDC to DC charger\u003c\/li\u003e\n\u003cli\u003eMPPT\u003c\/li\u003e\n\u003cli\u003eMonitor\u003c\/li\u003e\n\u003cli\u003eDistribution board\u003c\/li\u003e\n\u003cli\u003eCable kit\u003c\/li\u003e\n\u003cli\u003eDiagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eEvery positive cable is fused as close to the battery as possible, cable is sized for voltage drop rather than just current, and anything carrying mains voltage from an inverter or hook up goes through an RCD. If you are not confident with any of that, buy the fitted option; a badly wired 12V system can start a fire as easily as a mains one. Lithium iron phosphate batteries weigh about half as much as lead acid for the same usable capacity and can be run much flatter without damage. They must not be charged below freezing, which is why the self heating versions exist and why they are worth it in a van that is used in winter. They also need a charger and a DC to DC charger with a lithium profile. Conversions are heavy. Batteries, water, furniture and insulation can add 500 to 800 kg, and a van that starts at 3.5 tonnes gross can end up overweight before anyone has packed a bag. Every listing states its weight, and it is worth weighing the empty van at a public weighbridge before the build begins. Tell your insurer about the conversion as it progresses, not afterwards. Since 2019 the DVLA has been strict about reclassifying vans as motor caravans on the V5C, and most specialist insurers will cover a converted van as a camper whatever the V5C says, provided they know what is in it. We supply and fit camper conversion parts for panel vans, and we build and live in our own. We are not Ford, Mercedes-Benz or Volkswagen and are not appointed by them; the van names describe fitment. Everything here is chosen for vans that get used all year, including the British winter, and we say plainly where a cheaper part would do the job.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered with our wiring diagram or fitting notes, for a self build or your own installer. There is one version of this because it is the one we fit in our own vans.\u003c\/p\u003e","brand":"Vanlife Outfitters","offers":[{"title":"Default Title","offer_id":58074466091390,"sku":"VLO-PWS-022","price":3199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/8759\/0270\/files\/Complete_Power_System_with_300Ah_Lithium_and_3000VA_Inverter_522116be-bb94-40ca-afac-8dcaa93e9c87.jpg?v=1790179546"},{"product_id":"complete-power-system-with-400ah-lithium-and-1600va-inverter","title":"Complete Power System with 400Ah Lithium and 1600VA Inverter","description":"\u003cp\u003eComplete Power System with 400Ah Lithium and 1600VA Inverter: a pre designed system with 400Ah of lithium, a 1600VA inverter charger, DC to DC charger, MPPT controller, battery monitor and a fused distribution board.\u003c\/p\u003e\u003cp\u003eA complete electrical system sized for the way you use the van, with the batteries, charging and distribution designed together rather than bought one piece at a time. We size it from how many days you want to stay off grid and what you run, and we send the diagram with it. This part is not van specific, and the listing says where the mounting position matters.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Transit, Transit Custom, Sprinter, Crafter and Transporter builds, and most other panel vans\u003c\/li\u003e\n\u003cli\u003eVan body: not van specific\u003c\/li\u003e\n\u003cli\u003eYears: current range\u003c\/li\u003e\n\u003cli\u003eSpecification: 400Ah lithium, 1600VA inverter charger, 50 amp DC to DC, 50 amp MPPT\u003c\/li\u003e\n\u003cli\u003eQuality: established makers with UK support\u003c\/li\u003e\n\u003cli\u003ePower draw: up to 145 amps at full inverter load\u003c\/li\u003e\n\u003cli\u003eWiring: full cable kit with fuses and isolators and a wiring diagram\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 2 to 3 days\u003c\/li\u003e\n\u003cli\u003eRegulations: mains hook up wiring must include an RCD and be installed by a competent person, with an electrical installation certificate recommended\u003c\/li\u003e\n\u003cli\u003eWeight: about 65 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: three years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBatteries\u003c\/li\u003e\n\u003cli\u003eInverter charger\u003c\/li\u003e\n\u003cli\u003eDC to DC charger\u003c\/li\u003e\n\u003cli\u003eMPPT\u003c\/li\u003e\n\u003cli\u003eMonitor\u003c\/li\u003e\n\u003cli\u003eDistribution board\u003c\/li\u003e\n\u003cli\u003eCable kit\u003c\/li\u003e\n\u003cli\u003eDiagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eEvery positive cable is fused as close to the battery as possible, cable is sized for voltage drop rather than just current, and anything carrying mains voltage from an inverter or hook up goes through an RCD. If you are not confident with any of that, buy the fitted option; a badly wired 12V system can start a fire as easily as a mains one. Lithium iron phosphate batteries weigh about half as much as lead acid for the same usable capacity and can be run much flatter without damage. They must not be charged below freezing, which is why the self heating versions exist and why they are worth it in a van that is used in winter. They also need a charger and a DC to DC charger with a lithium profile. Conversions are heavy. Batteries, water, furniture and insulation can add 500 to 800 kg, and a van that starts at 3.5 tonnes gross can end up overweight before anyone has packed a bag. Every listing states its weight, and it is worth weighing the empty van at a public weighbridge before the build begins. Tell your insurer about the conversion as it progresses, not afterwards. Since 2019 the DVLA has been strict about reclassifying vans as motor caravans on the V5C, and most specialist insurers will cover a converted van as a camper whatever the V5C says, provided they know what is in it. We supply and fit camper conversion parts for panel vans, and we build and live in our own. We are not Ford, Mercedes-Benz or Volkswagen and are not appointed by them; the van names describe fitment. Everything here is chosen for vans that get used all year, including the British winter, and we say plainly where a cheaper part would do the job.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered with our wiring diagram or fitting notes, for a self build or your own installer. There is one version of this because it is the one we fit in our own vans.\u003c\/p\u003e","brand":"Vanlife Outfitters","offers":[{"title":"Default Title","offer_id":58074466124158,"sku":"VLO-PWS-023","price":3199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/8759\/0270\/files\/Complete_Power_System_with_400Ah_Lithium_and_1600VA_Inverter_77946eac-d24c-4913-bf59-f088f11db4a4.jpg?v=1790179547"},{"product_id":"complete-power-system-with-400ah-lithium-and-2000va-inverter","title":"Complete Power System with 400Ah Lithium and 2000VA Inverter","description":"\u003cp\u003eComplete Power System with 400Ah Lithium and 2000VA Inverter: a pre designed system with 400Ah of lithium, a 2000VA inverter charger, DC to DC charger, MPPT controller, battery monitor and a fused distribution board.\u003c\/p\u003e\u003cp\u003eA complete electrical system sized for the way you use the van, with the batteries, charging and distribution designed together rather than bought one piece at a time. We size it from how many days you want to stay off grid and what you run, and we send the diagram with it. This part is not van specific, and the listing says where the mounting position matters.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Transit, Transit Custom, Sprinter, Crafter and Transporter builds, and most other panel vans\u003c\/li\u003e\n\u003cli\u003eVan body: not van specific\u003c\/li\u003e\n\u003cli\u003eYears: current range\u003c\/li\u003e\n\u003cli\u003eSpecification: 400Ah lithium, 2000VA inverter charger, 50 amp DC to DC, 50 amp MPPT\u003c\/li\u003e\n\u003cli\u003eQuality: established makers with UK support\u003c\/li\u003e\n\u003cli\u003ePower draw: up to 181 amps at full inverter load\u003c\/li\u003e\n\u003cli\u003eWiring: full cable kit with fuses and isolators and a wiring diagram\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 2 to 3 days\u003c\/li\u003e\n\u003cli\u003eRegulations: mains hook up wiring must include an RCD and be installed by a competent person, with an electrical installation certificate recommended\u003c\/li\u003e\n\u003cli\u003eWeight: about 65 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: three years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBatteries\u003c\/li\u003e\n\u003cli\u003eInverter charger\u003c\/li\u003e\n\u003cli\u003eDC to DC charger\u003c\/li\u003e\n\u003cli\u003eMPPT\u003c\/li\u003e\n\u003cli\u003eMonitor\u003c\/li\u003e\n\u003cli\u003eDistribution board\u003c\/li\u003e\n\u003cli\u003eCable kit\u003c\/li\u003e\n\u003cli\u003eDiagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eEvery positive cable is fused as close to the battery as possible, cable is sized for voltage drop rather than just current, and anything carrying mains voltage from an inverter or hook up goes through an RCD. If you are not confident with any of that, buy the fitted option; a badly wired 12V system can start a fire as easily as a mains one. Lithium iron phosphate batteries weigh about half as much as lead acid for the same usable capacity and can be run much flatter without damage. They must not be charged below freezing, which is why the self heating versions exist and why they are worth it in a van that is used in winter. They also need a charger and a DC to DC charger with a lithium profile. Conversions are heavy. Batteries, water, furniture and insulation can add 500 to 800 kg, and a van that starts at 3.5 tonnes gross can end up overweight before anyone has packed a bag. Every listing states its weight, and it is worth weighing the empty van at a public weighbridge before the build begins. Tell your insurer about the conversion as it progresses, not afterwards. Since 2019 the DVLA has been strict about reclassifying vans as motor caravans on the V5C, and most specialist insurers will cover a converted van as a camper whatever the V5C says, provided they know what is in it. We supply and fit camper conversion parts for panel vans, and we build and live in our own. We are not Ford, Mercedes-Benz or Volkswagen and are not appointed by them; the van names describe fitment. Everything here is chosen for vans that get used all year, including the British winter, and we say plainly where a cheaper part would do the job.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered with our wiring diagram or fitting notes, for a self build or your own installer. There is one version of this because it is the one we fit in our own vans.\u003c\/p\u003e","brand":"Vanlife Outfitters","offers":[{"title":"Default Title","offer_id":58074466156926,"sku":"VLO-PWS-024","price":3349.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/8759\/0270\/files\/Complete_Power_System_with_400Ah_Lithium_and_2000VA_Inverter_02b983b0-a4a4-4bf4-90d2-895844e9476e.jpg?v=1790179547"},{"product_id":"complete-power-system-with-400ah-lithium-and-3000va-inverter","title":"Complete Power System with 400Ah Lithium and 3000VA Inverter","description":"\u003cp\u003eComplete Power System with 400Ah Lithium and 3000VA Inverter: a pre designed system with 400Ah of lithium, a 3000VA inverter charger, DC to DC charger, MPPT controller, battery monitor and a fused distribution board.\u003c\/p\u003e\u003cp\u003eA complete electrical system sized for the way you use the van, with the batteries, charging and distribution designed together rather than bought one piece at a time. We size it from how many days you want to stay off grid and what you run, and we send the diagram with it. This part is not van specific, and the listing says where the mounting position matters.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Transit, Transit Custom, Sprinter, Crafter and Transporter builds, and most other panel vans\u003c\/li\u003e\n\u003cli\u003eVan body: not van specific\u003c\/li\u003e\n\u003cli\u003eYears: current range\u003c\/li\u003e\n\u003cli\u003eSpecification: 400Ah lithium, 3000VA inverter charger, 50 amp DC to DC, 50 amp MPPT\u003c\/li\u003e\n\u003cli\u003eQuality: established makers with UK support\u003c\/li\u003e\n\u003cli\u003ePower draw: up to 272 amps at full inverter load\u003c\/li\u003e\n\u003cli\u003eWiring: full cable kit with fuses and isolators and a wiring diagram\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 2 to 3 days\u003c\/li\u003e\n\u003cli\u003eRegulations: mains hook up wiring must include an RCD and be installed by a competent person, with an electrical installation certificate recommended\u003c\/li\u003e\n\u003cli\u003eWeight: about 65 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: three years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBatteries\u003c\/li\u003e\n\u003cli\u003eInverter charger\u003c\/li\u003e\n\u003cli\u003eDC to DC charger\u003c\/li\u003e\n\u003cli\u003eMPPT\u003c\/li\u003e\n\u003cli\u003eMonitor\u003c\/li\u003e\n\u003cli\u003eDistribution board\u003c\/li\u003e\n\u003cli\u003eCable kit\u003c\/li\u003e\n\u003cli\u003eDiagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eEvery positive cable is fused as close to the battery as possible, cable is sized for voltage drop rather than just current, and anything carrying mains voltage from an inverter or hook up goes through an RCD. If you are not confident with any of that, buy the fitted option; a badly wired 12V system can start a fire as easily as a mains one. Lithium iron phosphate batteries weigh about half as much as lead acid for the same usable capacity and can be run much flatter without damage. They must not be charged below freezing, which is why the self heating versions exist and why they are worth it in a van that is used in winter. They also need a charger and a DC to DC charger with a lithium profile. Conversions are heavy. Batteries, water, furniture and insulation can add 500 to 800 kg, and a van that starts at 3.5 tonnes gross can end up overweight before anyone has packed a bag. Every listing states its weight, and it is worth weighing the empty van at a public weighbridge before the build begins. Tell your insurer about the conversion as it progresses, not afterwards. Since 2019 the DVLA has been strict about reclassifying vans as motor caravans on the V5C, and most specialist insurers will cover a converted van as a camper whatever the V5C says, provided they know what is in it. We supply and fit camper conversion parts for panel vans, and we build and live in our own. We are not Ford, Mercedes-Benz or Volkswagen and are not appointed by them; the van names describe fitment. Everything here is chosen for vans that get used all year, including the British winter, and we say plainly where a cheaper part would do the job.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered with our wiring diagram or fitting notes, for a self build or your own installer. There is one version of this because it is the one we fit in our own vans.\u003c\/p\u003e","brand":"Vanlife Outfitters","offers":[{"title":"Default Title","offer_id":58074466189694,"sku":"VLO-PWS-025","price":3649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/8759\/0270\/files\/Complete_Power_System_with_400Ah_Lithium_and_3000VA_Inverter_4c92ad08-fa2f-427e-8cf1-7ef3eb35f53b.jpg?v=1790179547"},{"product_id":"complete-power-system-with-600ah-lithium-and-1600va-inverter","title":"Complete Power System with 600Ah Lithium and 1600VA Inverter","description":"\u003cp\u003eComplete Power System with 600Ah Lithium and 1600VA Inverter: a pre designed system with 600Ah of lithium, a 1600VA inverter charger, DC to DC charger, MPPT controller, battery monitor and a fused distribution board.\u003c\/p\u003e\u003cp\u003eA complete electrical system sized for the way you use the van, with the batteries, charging and distribution designed together rather than bought one piece at a time. We size it from how many days you want to stay off grid and what you run, and we send the diagram with it. This part is not van specific, and the listing says where the mounting position matters.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Transit, Transit Custom, Sprinter, Crafter and Transporter builds, and most other panel vans\u003c\/li\u003e\n\u003cli\u003eVan body: not van specific\u003c\/li\u003e\n\u003cli\u003eYears: current range\u003c\/li\u003e\n\u003cli\u003eSpecification: 600Ah lithium, 1600VA inverter charger, 50 amp DC to DC, 50 amp MPPT\u003c\/li\u003e\n\u003cli\u003eQuality: established makers with UK support\u003c\/li\u003e\n\u003cli\u003ePower draw: up to 145 amps at full inverter load\u003c\/li\u003e\n\u003cli\u003eWiring: full cable kit with fuses and isolators and a wiring diagram\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 2 to 3 days\u003c\/li\u003e\n\u003cli\u003eRegulations: mains hook up wiring must include an RCD and be installed by a competent person, with an electrical installation certificate recommended\u003c\/li\u003e\n\u003cli\u003eWeight: about 85 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: three years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBatteries\u003c\/li\u003e\n\u003cli\u003eInverter charger\u003c\/li\u003e\n\u003cli\u003eDC to DC charger\u003c\/li\u003e\n\u003cli\u003eMPPT\u003c\/li\u003e\n\u003cli\u003eMonitor\u003c\/li\u003e\n\u003cli\u003eDistribution board\u003c\/li\u003e\n\u003cli\u003eCable kit\u003c\/li\u003e\n\u003cli\u003eDiagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eEvery positive cable is fused as close to the battery as possible, cable is sized for voltage drop rather than just current, and anything carrying mains voltage from an inverter or hook up goes through an RCD. If you are not confident with any of that, buy the fitted option; a badly wired 12V system can start a fire as easily as a mains one. Lithium iron phosphate batteries weigh about half as much as lead acid for the same usable capacity and can be run much flatter without damage. They must not be charged below freezing, which is why the self heating versions exist and why they are worth it in a van that is used in winter. They also need a charger and a DC to DC charger with a lithium profile. Conversions are heavy. Batteries, water, furniture and insulation can add 500 to 800 kg, and a van that starts at 3.5 tonnes gross can end up overweight before anyone has packed a bag. Every listing states its weight, and it is worth weighing the empty van at a public weighbridge before the build begins. Tell your insurer about the conversion as it progresses, not afterwards. Since 2019 the DVLA has been strict about reclassifying vans as motor caravans on the V5C, and most specialist insurers will cover a converted van as a camper whatever the V5C says, provided they know what is in it. We supply and fit camper conversion parts for panel vans, and we build and live in our own. We are not Ford, Mercedes-Benz or Volkswagen and are not appointed by them; the van names describe fitment. Everything here is chosen for vans that get used all year, including the British winter, and we say plainly where a cheaper part would do the job.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered with our wiring diagram or fitting notes, for a self build or your own installer. There is one version of this because it is the one we fit in our own vans.\u003c\/p\u003e","brand":"Vanlife Outfitters","offers":[{"title":"Default Title","offer_id":58074466222462,"sku":"VLO-PWS-026","price":3649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/8759\/0270\/files\/Complete_Power_System_with_600Ah_Lithium_and_1600VA_Inverter_ecbfb5de-6359-4d7b-8f2a-2d1955c40835.jpg?v=1790179547"},{"product_id":"complete-power-system-with-600ah-lithium-and-2000va-inverter","title":"Complete Power System with 600Ah Lithium and 2000VA Inverter","description":"\u003cp\u003eComplete Power System with 600Ah Lithium and 2000VA Inverter: a pre designed system with 600Ah of lithium, a 2000VA inverter charger, DC to DC charger, MPPT controller, battery monitor and a fused distribution board.\u003c\/p\u003e\u003cp\u003eA complete electrical system sized for the way you use the van, with the batteries, charging and distribution designed together rather than bought one piece at a time. We size it from how many days you want to stay off grid and what you run, and we send the diagram with it. This part is not van specific, and the listing says where the mounting position matters.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Transit, Transit Custom, Sprinter, Crafter and Transporter builds, and most other panel vans\u003c\/li\u003e\n\u003cli\u003eVan body: not van specific\u003c\/li\u003e\n\u003cli\u003eYears: current range\u003c\/li\u003e\n\u003cli\u003eSpecification: 600Ah lithium, 2000VA inverter charger, 50 amp DC to DC, 50 amp MPPT\u003c\/li\u003e\n\u003cli\u003eQuality: established makers with UK support\u003c\/li\u003e\n\u003cli\u003ePower draw: up to 181 amps at full inverter load\u003c\/li\u003e\n\u003cli\u003eWiring: full cable kit with fuses and isolators and a wiring diagram\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 2 to 3 days\u003c\/li\u003e\n\u003cli\u003eRegulations: mains hook up wiring must include an RCD and be installed by a competent person, with an electrical installation certificate recommended\u003c\/li\u003e\n\u003cli\u003eWeight: about 85 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: three years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBatteries\u003c\/li\u003e\n\u003cli\u003eInverter charger\u003c\/li\u003e\n\u003cli\u003eDC to DC charger\u003c\/li\u003e\n\u003cli\u003eMPPT\u003c\/li\u003e\n\u003cli\u003eMonitor\u003c\/li\u003e\n\u003cli\u003eDistribution board\u003c\/li\u003e\n\u003cli\u003eCable kit\u003c\/li\u003e\n\u003cli\u003eDiagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eEvery positive cable is fused as close to the battery as possible, cable is sized for voltage drop rather than just current, and anything carrying mains voltage from an inverter or hook up goes through an RCD. If you are not confident with any of that, buy the fitted option; a badly wired 12V system can start a fire as easily as a mains one. Lithium iron phosphate batteries weigh about half as much as lead acid for the same usable capacity and can be run much flatter without damage. They must not be charged below freezing, which is why the self heating versions exist and why they are worth it in a van that is used in winter. They also need a charger and a DC to DC charger with a lithium profile. Conversions are heavy. Batteries, water, furniture and insulation can add 500 to 800 kg, and a van that starts at 3.5 tonnes gross can end up overweight before anyone has packed a bag. Every listing states its weight, and it is worth weighing the empty van at a public weighbridge before the build begins. Tell your insurer about the conversion as it progresses, not afterwards. Since 2019 the DVLA has been strict about reclassifying vans as motor caravans on the V5C, and most specialist insurers will cover a converted van as a camper whatever the V5C says, provided they know what is in it. We supply and fit camper conversion parts for panel vans, and we build and live in our own. We are not Ford, Mercedes-Benz or Volkswagen and are not appointed by them; the van names describe fitment. Everything here is chosen for vans that get used all year, including the British winter, and we say plainly where a cheaper part would do the job.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered with our wiring diagram or fitting notes, for a self build or your own installer. There is one version of this because it is the one we fit in our own vans.\u003c\/p\u003e","brand":"Vanlife Outfitters","offers":[{"title":"Default Title","offer_id":58074466255230,"sku":"VLO-PWS-027","price":3799.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/8759\/0270\/files\/Complete_Power_System_with_600Ah_Lithium_and_2000VA_Inverter_2d20265f-d9e8-4f9a-a1e5-f49ce67584a1.jpg?v=1790179547"},{"product_id":"complete-power-system-with-600ah-lithium-and-3000va-inverter","title":"Complete Power System with 600Ah Lithium and 3000VA Inverter","description":"\u003cp\u003eComplete Power System with 600Ah Lithium and 3000VA Inverter: a pre designed system with 600Ah of lithium, a 3000VA inverter charger, DC to DC charger, MPPT controller, battery monitor and a fused distribution board.\u003c\/p\u003e\u003cp\u003eA complete electrical system sized for the way you use the van, with the batteries, charging and distribution designed together rather than bought one piece at a time. We size it from how many days you want to stay off grid and what you run, and we send the diagram with it. This part is not van specific, and the listing says where the mounting position matters.\u003c\/p\u003e\u003ch3\u003eSpecification and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: Transit, Transit Custom, Sprinter, Crafter and Transporter builds, and most other panel vans\u003c\/li\u003e\n\u003cli\u003eVan body: not van specific\u003c\/li\u003e\n\u003cli\u003eYears: current range\u003c\/li\u003e\n\u003cli\u003eSpecification: 600Ah lithium, 3000VA inverter charger, 50 amp DC to DC, 50 amp MPPT\u003c\/li\u003e\n\u003cli\u003eQuality: established makers with UK support\u003c\/li\u003e\n\u003cli\u003ePower draw: up to 272 amps at full inverter load\u003c\/li\u003e\n\u003cli\u003eWiring: full cable kit with fuses and isolators and a wiring diagram\u003c\/li\u003e\n\u003cli\u003eInstallation time: about 2 to 3 days\u003c\/li\u003e\n\u003cli\u003eRegulations: mains hook up wiring must include an RCD and be installed by a competent person, with an electrical installation certificate recommended\u003c\/li\u003e\n\u003cli\u003eWeight: about 85 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: three years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat arrives\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBatteries\u003c\/li\u003e\n\u003cli\u003eInverter charger\u003c\/li\u003e\n\u003cli\u003eDC to DC charger\u003c\/li\u003e\n\u003cli\u003eMPPT\u003c\/li\u003e\n\u003cli\u003eMonitor\u003c\/li\u003e\n\u003cli\u003eDistribution board\u003c\/li\u003e\n\u003cli\u003eCable kit\u003c\/li\u003e\n\u003cli\u003eDiagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eEvery positive cable is fused as close to the battery as possible, cable is sized for voltage drop rather than just current, and anything carrying mains voltage from an inverter or hook up goes through an RCD. If you are not confident with any of that, buy the fitted option; a badly wired 12V system can start a fire as easily as a mains one. Lithium iron phosphate batteries weigh about half as much as lead acid for the same usable capacity and can be run much flatter without damage. They must not be charged below freezing, which is why the self heating versions exist and why they are worth it in a van that is used in winter. They also need a charger and a DC to DC charger with a lithium profile. Conversions are heavy. Batteries, water, furniture and insulation can add 500 to 800 kg, and a van that starts at 3.5 tonnes gross can end up overweight before anyone has packed a bag. Every listing states its weight, and it is worth weighing the empty van at a public weighbridge before the build begins. Tell your insurer about the conversion as it progresses, not afterwards. Since 2019 the DVLA has been strict about reclassifying vans as motor caravans on the V5C, and most specialist insurers will cover a converted van as a camper whatever the V5C says, provided they know what is in it. We supply and fit camper conversion parts for panel vans, and we build and live in our own. We are not Ford, Mercedes-Benz or Volkswagen and are not appointed by them; the van names describe fitment. Everything here is chosen for vans that get used all year, including the British winter, and we say plainly where a cheaper part would do the job.\u003c\/p\u003e\u003ch3\u003eWhich version to buy\u003c\/h3\u003e\u003cp\u003eParts Only is the parts delivered with our wiring diagram or fitting notes, for a self build or your own installer. There is one version of this because it is the one we fit in our own vans.\u003c\/p\u003e","brand":"Vanlife Outfitters","offers":[{"title":"Default Title","offer_id":58074466287998,"sku":"VLO-PWS-028","price":3874.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/8759\/0270\/files\/Complete_Power_System_with_600Ah_Lithium_and_3000VA_Inverter_93030b74-e189-41fc-8c50-030c16881d30.jpg?v=1790179547"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/8759\/0270\/collections\/hf_20260923_160953_f68f5419-c8d2-4fd0-84ca-e97d99f85240.png?v=1790179965","url":"https:\/\/vanlife-outfitters.com\/collections\/electrical-systems.oembed","provider":"Vanlife Outfitters","version":"1.0","type":"link"}